Precaution, Pretection and Safety, all in FireTC
firetc@firetc.com
 
Inquiry For Fire Testing
 
Recommended Service
Hot Fire test center
 
Your location: Home » Fire test center » Railway Component » Text

EN 60332-3-24 Fire test on bunched cables

Zoom  Zoom Issue Date:2014-08-14   Browse:2343
 EN 60332-3-24 Fire test on bunched cables 

EN 60332-3-24 Fire test on bunched cables - Standard 

EN60332-3-24: 2010-08 Test on Electric and Optical Fibre Cables under Fire Conditions Part 3-24: Test For vertical flame spread of vertically---Mounted bunched wires or cables Category C (IEC 60332-3-24:2000 + A1:2008) 

Note: The EN 60332-3-24-2010 standard supersedes EN50266-2-4-2001 standard. 

EN 60332-3-24 Fire test on bunched cables - Scope 

For cables with d ≥ 12mm  

EN 60332-3-24 Fire test on bunched cables - Requirement 

For cable diameter 12 mm; Category C. At the end of the test, the maximum distance of charred part measured and evaluated at the sample of the lower edge of the burner, on both sides of the Have not reached the head height of 2.5 meters.(Refer to EN 45545-2 test standard) 

EN 60332-3-24 Fire test on bunched cables - Reference Standard 

EN45545-2: Fire protection of railway vehicles - Part 2: Requirement for fire behaviors of materials and components 

DIN5510-2: Preventive fire protection in railway vehicles; Part 2: Fire behavior and fire side effects of materials and parts, classification, requirement and test methods 

DIN EN 50266-2-4:: Common test methods for cable under fire condition—Test for vertical flame spread of vertically-mounted bunched wires or cables –Part 2-4: Procedures –Category C 

EN 60332-3-25-2010 Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D (IEC 60332-3-25:2000 + A1:2008) 

DIN EN 50266-2-5 Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables Part 2-5: procedures – Category D 

DIN EN 50305: Railway applications. Railway rolling stock cables having special fire performance. Test methods 

DIN EN 60332-1-2: Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW pre-mixed flame 

DIN EN 61034-1: Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus

 

 
 
[ Fire test center Search ]  [ ]  [ Forword to friends ]  [ Print ]  [ Close ]  [ Back to Top ]

 

 
 
Home | About us | Contact | Terms & Conditions | Copyright | Site Map | Friend link | Guestbook | Old Version | 闽ICP备09009213号
©2013-2015 FIRETC.NET All Rights Reserved   ICP:闽ICP备09009213号-4