Precaution, Pretection and Safety, all in FireTC
firetc@firetc.com
 
Inquiry For Fire Testing
 
Recommended Service
Hot Fire test center
 
Your location: Home » Fire test center » Railway Component » Text

DIN EN 61034 / EN 61034 Smoke density test

Zoom  Zoom Issue Date:2014-08-14   Browse:2143
 DIN EN 61034 / EN 61034 Smoke density test 

DIN EN 61034 / EN 61034 Smoke density test - Standard 

DIN EN 61034-1:2006-03 Measurement of smoke density of cables burning under defined conditions –Part 1: Test apparatus 

DIN EN 61034-2:2006-03 Measurement of smoke density of cables burning under defined conditions –Part 2: Test procedure and requirements 

DIN EN 61034 / EN 61034 Smoke density test - Test condition 

Before testing, all test pieces was carefully straightened and then conditioned for at least 16 h at 23 °C± 5 °C. 

DIN EN 61034 / EN 61034 Smoke density test - Requirement 

The value of light transmission allowed within the first 20 min not less than 60%. (Refer to DIN 5510-2 test standard). 

DIN EN 61034 / EN 61034 Smoke density test - Test condition 

EN45545-2: Fire protection of railway vehicles - Part 2: Requirement for fire behaviors of materials and components 

DIN5510-2: Preventive fire protection in railway vehicles; Part 2: Fire behavior and fire side effects of materials and parts, classification, requirement and test methods 

EN 61034-1, Measurement of smoke density of cables burning under defined conditions -Part 1: Test apparatus 

EN 61034-2, Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements 

EN 50305Railway rolling stock cables having special fire performance -Test methods 

DIN EN60332-1-2: Test for vertical flame propagation for a single insulated wire or cable 

EN60332-3-24: Test on Electric and Optical Fibre Cables under Fire Conditions Part 3-24: Test For vertical flame spread of vertically---Mounted bunched wires or cables Category C 

DIN EN 50266-2-5 Common Test Methods for Cables under Fire Conditions - Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables Part 2-5: procedures – Category D

 
 
[ Fire test center Search ]  [ ]  [ Forword to friends ]  [ Print ]  [ Close ]  [ Back to Top ]

 

 
 
Home | About us | Contact | Terms & Conditions | Copyright | Site Map | Friend link | Guestbook | Old Version | 闽ICP备09009213号
©2013-2015 FIRETC.NET All Rights Reserved   ICP:闽ICP备09009213号-4