Precaution, Pretection and Safety, all in FireTC
firetc@firetc.com
 
Inquiry For Fire Testing
 
Recommended Service
Hot Fire test center
 
Your location: Home » Fire test center » Railway Component » Text

EN 50305 Fire test on bunched cables

Zoom  Zoom Issue Date:2014-08-14   Browse:2422
 EN 50305 Fire test on bunched cables 

EN 50305 Fire test on bunched cables - Standard 

EN 50305 Railway applications-Railway rolling cables having special fire performance 

EN 50305 Fire test on bunched cables - Scope 

EN 50305:2002, Clause 9.1.1 for cables with 6 mm < D < 12 mm

EN 50305:2002, Clause 9.1.2 for cables with D ≤ 6 mm

(Refer to EN 45545-2:2013 test standard) 

EN 50305 Fire test on bunched cables - Requirement 

for cable diameter> 6 mm and <12 mm; Category D. At the end of the test, the maximum distance of charred part measured and evaluated at the sample of the lower edge of the burner, on both sides of the Have not reached the head height of 2.5 meters. 

for cable diameter 6 mm; Category D. Assignment to DIN EN 50306-1 (VDE 0260-306-1) :2003-05, 8.2.3 or DIN EN 50264-1 (VDE 0260-264-1) :2003-06, 8.2.3. At the end of the test, the greatest distance of the charred Part measured at the sample and evaluated by the lower edge of the burner, on both sides of the ladder have not reached the height of 1.5 meters.

(Refer to EN 45545-2:2013 test standard) 

EN 50305 Fire test on bunched cables - Reference Standard 

EN45545-2: Fire protection of railway vehicles - Part 2: Requirement for fire behaviours of materials and components 

EN60332-3-24: 2010-08 Test on Electric and Optical Fibre Cables under Fire Conditions Part 3-24: Test For vertical flame spread of vertically---Mounted bunched wires or cables Category C (IEC 60332-3-24:2000 + A1:2008) 

DIN EN 50266-2-4:: Common test methods for cable under fire condition—Test for vertical flame spread of vertically-mounted bunched wires or cables –Part 2-4: Procedures –Category C 

DIN EN 50305: Railway applications. Railway rolling stock cables having special fire performance. Test methods 

DIN EN 60332-1-2: Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW pre-mixed flame 

DIN EN 61034-1: Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus

 

 
 
[ Fire test center Search ]  [ ]  [ Forword to friends ]  [ Print ]  [ Close ]  [ Back to Top ]

 

 
 
Home | About us | Contact | Terms & Conditions | Copyright | Site Map | Friend link | Guestbook | Old Version | 闽ICP备09009213号
©2013-2015 FIRETC.NET All Rights Reserved   ICP:闽ICP备09009213号-4