Precaution, Pretection and Safety, all in FireTC
firetc@firetc.com
 

Sell Non-corrosion fast cure rtv silicone sealant sc-1103

Click image to view original picture
Product/Service: Non-corrosion fast cure rtv silicone sealant sc-1103  
Demand Quantity:  
Price Requirement:   Inquiry
Size Requirement:
Package Requirement:
Address: China
Validity Period: Longterm Validity
Last Update: 2014-05-22
Browse: 995
Basic Info of Company
 
 
Detailed Description

Non-corrosion fast cure rtv silicone sealant
1.Flame retardant
2.Fast cure
3.Non-corrosion; meets MIL-A-46146B corrosion test

Non-corrosion fast cure rtv silicone sealant sc-1103

 

PRODUCT DESCRIRTION

SC-1103 provides the following product characteristics:

Technology

Silicone

Chemical type

White viscous paste

Appearance (uncured)

Translucent liquid

Components

One component - requires no mixing

Cure

Room temperature vulcanizing (RTV)

Specific benefit

Flame retardant

Applications

Sealing and gluing

KEY FEATURES

Flame retardant

Low volatility

Non-corrosion to metals; meets MIL-A-46146B corrosion test

Fast cure

Low odor cure; releases an alcohol vapor during cure

Primerless adhesion to many substrates  

TIPICAL PRODUCT DATA

TYPICAL UNCURES PROPERTIES

Appearance

 

White viscous paste

PH

 

7.2

Tack-free time(23°C)

min

3

TYPICAL CURED PROPERTIES (7DAYS @ 23°C /50% RH)

Appearance

 

Elastic rubber

Specific gravity

 

1.45

Hardness

Type A

70

Tensile strength

MPa

2.58

Breaking elongation

%

88

Shear bond strength

MPa

2.5

Volatile siloxane

Wt %

0.028

Dielectric strength

KV/mm

20

Volume resistivity

M •m

2*107

Dielectric constant(50Hz)

 

3.8

Dielectric loss(50Hz)

 

0.005

GENERAL INSTRUCTIONS AND PRECAUTIONS

Avoid getting uncured material in the eyes, take eye protection at all times when working with this product.

Extended contact with the skin can cause irritation and should be avoided.    

Wear protective gloves when working with this product.

Maintain good ventilation in the workplace at all times

 

 

DIRECTIONS FOR USE

For best performance bond surfaces should be clean and free from grease.

Full performance properties will develop over 72 hours.

Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is dispensed.

Excess material can be easily wiped away with non-polar solvents

STORAGE

Store in a dry, cool place away from direct sunlight Optimal Storage:  8°C to 21°C. Storage below 8°C or greater than 28°C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container.

Note

The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user's responsibility to determine suitability for the user's purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide.

 
More..Similar Offer

[ Offer Search ]  [ ]  [ Forword to friends ]  [ Print ]  [ Close ]  [ Back to Top ]