WACKER, the Munich-based chemical company, will be presenting two new liquid silicone rubber grades at this year’s FAKUMA tradeshow: ELASTOSIL® LR 3011/50 FR and ELASTOSIL® LR 3170/40. The
Up to now, the way to render liquid silicone rubber grades flame resistant was to add inert fillers such as quartz. These types of fillers, however, result in increased material abrasion during the injection molding process. Such abrasion, which is especially evident in the sprue portion of the injection mold, shortens maintenance intervals and leads to costly mold reworking.
The new ELASTOSIL® LR 3011/50 FR liquid silicone rubber eliminates this problem. It is formulated with special inert fillers that work together to produce outstanding flame-retardant properties without the use of abrasive additives. The result is a clear reduction in mold fouling over traditional flame-resistant liquid silicone rubber grades, and this, in turn, significantly extends equipment life and offers considerable process-cost advantages. The vulcanizates of ELASTOSIL® LR 3011/50 FR in various thicknesses have been rated V-0, as per Underwriter Laboratories standard UL 94.
ELASTOSIL® LR 3170/40
Self-Adhesive Liquid Silicone Rubber
ELASTOSIL® LR 3170/40 is a new liquid silicone rubber grade that addresses the increasing importance of two-component injection molded products. The silicone in this case is the soft component of a hard/soft composite. ELASTOSIL® LR 3170/40 is self-adhesive and, after curing, also meets the V-0 flammability rating defined in the UL 94 standard.
ELASTOSIL® LR 3170/40 uses a patented WACKER self-bonding technology that has already found application in other silicone grades. This liquid silicone rubber is formulated in such a way that it begins bonding to hard components – but not to the surface of the injection mold – during the vulcanization process. Surface priming or pretreatment (with plasma, for instance) is no longer necessary. In the production of two-component injection molded products, this bonding behavior allows manufacturers to increase automation to a level previously unattainable with flame-resistant liquid silicone rubber. Suitable hard components include metals such as aluminum and certain flame-resistant polyamides.
Properties and Areas of Application
ELASTOSIL® LR 3011/50 FR and ELASTOSIL® LR 3170/40 can both be easily integrated into the injection-molding process. The vulcanizates of both silicone grades yield a balanced material profile and are characterized by favorable mechanical and dielectric properties, as well as excellent heat resistance.
Possible applications for both of these new products can be found wherever processes require not only high levels of fire protection, but also properties typically associated with silicone, such as elasticity at low temperatures, electrical non-conductivity and resistance to heat, weathering and aging. Applications include LED fittings for background lighting in flat screen monitors, axial and radial seals in connection sockets, and single-wire seals for the housing of solar collectors.
The rapid development of electrically powered vehicles has increased flame-resistance requirements for the components used in this field. A high level of safety must also be guaranteed in the event of overheating or a short circuit. ELASTOSIL® LR 3170/40 and ELASTOSIL® LR 3011/50 FR satisfy these increasing demands, with each serving as fire protection materials whenever a product needs to be both highly resistant to electrical discharge and sealed from external media.