Sell ROHS SOFT Silicone Coated Fibergalss Sleevings

Silicone Fiberglass Sleevings
1)Flexible,soft
2)Rohs Compliant
3)High temperature resistant
4)Flame Retardant

Silicone Fiberglass Sleeve

 

1.0Description

WCW Silicone Resin coated Sleeving is a fiberglass braid with a silicone composite coating. This sleeving is best in areas where design requirements specify superior moisture, heat and radiation resistance. In addition to its Class 200°C rating, it also exhibits good low temperature properties. WCWSilicone Resin Sleeving is available as Silicone Resin coated in the four top grades and as standard Silicone Resin in Grade C-3 with Silicone Resin coated being a more flexible product designed to conform to sharp bends.

 

2.0Specifications

Type/file No.	Testing Condition	Lighting-resistance	Temperature-resistance	Inserting Voltage	Average voltage	Individual Value
SGS-15 E233804	UL1441	UL V W-1	+200°C-10°C	C	1500V	1000V
SGS-25 E233804	UL1441	UL V W-1	+200°C-10°C	B	2500V	1800V
SRS-70 E233803	UL1441	UL V W-1	+200°C-10°C	A	7000V	5000V

WCW Silicone Resin coated Sleeving conforms to, and is listed on the Qualified Products UL1441 VW-1  UL CUL TS16949 UL NO E233803 E233804

Under the Component Program of Underwriters Laboratories, Grade A WCW Silicone Resin coated is recognized for 200°C, 600 volt service under UL File #E233804 . It is incorporated in systems work, per UL Safety Standard E233803, to facilitate product acceptance by UL. CSA International certifies the use of Grade A Resin coated for 200°C, 600 volt service under CUL . Additionally, standard Silicone Resin (Grade C-3) complies with UL’s VW-1 flammability requirements under UL File #E233804

 

3.0Applications

WCW Silicone Resin coated Sleeving is used in nuclear motors, electric motors, equipment leads, relay leads and heating cable where flexibility, high dielectric protection and heat endurance are required and temperatures up to 200°C are encountered. Its good abrasion and radiation resistance also find wide use in aerospace and atomic energy applications.

 

4.0Sizes

AWG #24 through 2”  l.D:0.5-35.0mm

. Other sizes subject to inquiry

Inside diameter		The minimum Wall thickness		Packing
Range	Tolerance	A grade	B,C,grade	(M/Roll)
0.5-2.5mm	+0.25-0.00mm	0.38mm	0.20mm	100
3.0-4.5mm	+0.30-0.00mm	0.45mm	0.23mm	100
5.0-6.0mm	+0.40-0.00mm	0.45mm	0.28mm	100
7.0-9.0mm	+0.55-0.00mm	0.50mm	0.32mm	50
10.0-14.0mm	+0.75-0.00mm	0.60mm	0.40mm	50
15.0-25.0mm	+0.85-0.00mm	0.64mm	0.43mm	30

 

Standard Color

Natural. Other colors made to order.

Standard Packaging

150Meters/Cardboard spool 50meters/Cardboard Spool

Cut piece are available

Carton volume:0.36*0.36*0.61