Precaution, Pretection and Safety, all in FireTC
firetc@firetc.com
 
Inquiry For Fire Testing
 
Recommended Service
Hot Fire test center
 
Your location: Home » Fire test center » Aircraft Material » Text

ASTM F 814 Specific Optical Density of Smoke Generated of Solid Materials

Zoom  Zoom Issue Date:2020-05-13   Browse:903
 
ASTM F 814 Fire test-Standard

ASTM F 814 Test Method for Specific Optical Density of Smoke Generated by Solid Materials for Aerospace Applications

ASTM F 814 Fire test -Scope
This test method covers determination of the specific optical density of smoke generated by solid aerospace materials and assemblies, including insulated wire, in thicknesses up to 1 in. (25.4 mm) for flat specimens except for thermoplastic foams which shall be restricted to a maximum thickness of 0.5 in. (12.7 mm), and up to ¼ in. (6.35 mm) in diameter for insulated wire specimens. Measurement is made of the attenuation of a light beam by smoke (suspended solid and liquid particles) accumulating within a closed chamber, due to nonflaming pyrolitic decomposition and flaming combustion. Results are expressed in terms of specific optical density which is derived from a geometric factor and the measured optical density, a measurement characteristic of the concentration of smoke

ASTM F 814 Fire test -Relative standards
ASTM C220 - Standard Specification for Flat Asbestos-Cement Sheets
ASTM D2843 - Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM E662 - Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

 
 
[ Fire test center Search ]  [ ]  [ Forword to friends ]  [ Print ]  [ Close ]  [ Back to Top ]

 

 
 
Home | About us | Contact | Terms & Conditions | Copyright | Site Map | Friend link | Guestbook | Old Version | 闽ICP备09009213号
©2013-2015 FIRETC.NET All Rights Reserved   ICP:闽ICP备09009213号-4