Precaution, Pretection and Safety, all in FireTC
firetc@firetc.com
 
Inquiry For Fire Testing
 
Recommended Service
Hot Fire test center
 
Your location: Home » Fire test center » Electrical & Electronic » Text

GB/T 17650.1 Determination of the amount of halogen acid gas

Zoom  Zoom Issue Date:2020-05-07   Browse:586
 
GB/T 17650.1 Determination of the amount of halogen acid gas – Standard
GB/T 17650.1 Test on gases evolved during combustion of materials from cables Part 1: Determination of the amount of halogen acid gas

GB/T 17650.1 Determination of the amount of halogen acid gas – Scope

The test method specified in Part 1 of this standard is applicable to the total amount of halogen acid gas other than hydrofluoric acid released during combustion of the halogenated polymer-based mixture and halogen-containing additive mixture taken from the cable or optical cable structure Determination.

In order to ensure the accuracy of the test, this test method is not suitable for samples with a halogen acid release of less than 5mg / g. This method cannot be used to determine that a mixture or material is "halogen-free." For such mixtures or materials, as well as all mixtures or materials with a halogen acid equivalent content of less than 5 mg / g, the method specified in GB / T 17650.2 is recommended.

GB/T 17650.1 Determination of the amount of halogen acid gas – Reference standard
GB/T 17650.2 Test on gases evolved during combustion of materials from cables--Part 2: Determination of degree of acidity of gases by measuring pH and conductivity

 
 
[ Fire test center Search ]  [ ]  [ Forword to friends ]  [ Print ]  [ Close ]  [ Back to Top ]

 

 
 
Home | About us | Contact | Terms & Conditions | Copyright | Site Map | Friend link | Guestbook | Old Version | 闽ICP备09009213号
©2013-2015 FIRETC.NET All Rights Reserved   ICP:闽ICP备09009213号-4