ASTM F2152 Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom

ASTM F2152  Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
ASTM F2152 溢出油就地燃烧的标准指南:耐火臂
This guide covers a set of criteria to evaluate the performance, material characteristics, and essential features of fire-resistant oil spill containment boom. Two types of fire-resistant oil containment Boom are covered: those that are intrinsically fire-resistant through the use of fire-resistant materials, and those that provide fire-resistance through the use of coolants. The boom shall be tested for operability, oil containment, and fire resistance.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1. Scope
1.1 This guide covers a set of criteria to evaluate the performance, material characteristics, and essential features of fire-resistant oil spill containment boom.
1.2 This guide covers two types of fire-resistant oil containment boom: those that are intrinsically fire-resistant through the use of fire-resistant materials, and those that provide fire-resistance through the use of coolants. This guide may not be fully applicable to other types of fire-resistant boom.
1.3 This guide is one of four related to in-situ burning of oil spills. Guide F 1788 addresses environmental and operational considerations, Guide F 1990 addresses ignition devices, and Guide F 2230 addresses burning in ice conditions.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
F625 Practice for Classifying Water Bodies for Spill Control Systems
F715 Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
F818 Terminology Relating to Spill Response Barriers
F962 Specification for Oil Spill Response Boom Connection: Z-Connector
F1093 Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
F1523 Guide for Selection of Booms in Accordance With Water Body Classifications
F1788 Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
F1990 Guide for In-Situ Burning of Spilled Oil: Ignition Devices
F2084 Guide for Collecting Containment Boom Performance Data in Controlled Environments
F2230 Guide for In-situ Burning of Oil Spills on Water: Ice Conditions
Index Terms
fire containment booms; fire-resistant booms; in-situ burning; oil spill burning; oil spill containment; oil spill disposal;