Sell pvc control cable

PVC control cable
1.Conductor:Copper
2.Insulation:PE
3.Sheath:Fire Resistance PVC
4.Standard:IEC ,ISO9001-2000

PVC control cable

Specifications

control cable
standard: GB DIN ASTM

control cable

1product characteristics and uses
This product is applicable to AC rated voltage 450/750V and below automatic control or monitoring systems, electrical instrumentation and other places connected with the transmission line.
Low Smoke Zero Halogen polyolefin with a small amount of burning smoke, halogen-free acid gas release, are environment-friendly cable, applicable to the special requirements for fire with the occasion.

2Product performance standards
GB9330.2-1998

3Use the characteristics of
a. AC rated voltage: 450/750KV
b. The maximum working temperature: PVC (PE) insulation does not exceed 70 oC
c. Minimum ambient temperature: PVC jacket: fixed installation -40 oC
, non-fixed installation -15 oC

d. Cable laying temperature should not be less than 0 oC
.
e. Cable to allow bending radius: non-sheathed cables Cable diameter minimum of 6 times the
Copperbelt block or steel armored cable a minimum of 12 times the cable diameter
4 Basic Model and name
PVC insulated and sheathed control cable          

Type	Name	Core Number	Rated Voltage  (V)	Nominal cross-section(mm2)
KVV	Copper PVC insulated PVC sheathed control cable	4--61	450/750	0.75--10
KVV22	Copper PVC insulated PVC sheathed steel tape armored control cable	4--61	450/750	0.75--10
KVVP	Copper PVC insulated PVC sheathed copper wire braided shield control cable	4--61	450/750	0.75--2.5
KVVP2	Copper PVC insulated PVC sheathed control cable shield Copperbelt	4--61	450/750	0.75--2.5