Sell Zirconium Silicate bead for ceramic industry

1) Excellent wear resistance
2) High gravity,no pollution
3) Preferable toughness
4) Good stability

           

Characteristic:

1. The internal structure of the bead is very fine and homogeneous due to the special technique, thus ensuring the even quality of material being grinded.

2. Tough bead bears impact better, and minimum friction allows minimum wear down to the equipment. 

3. High density greatly enhances grinding effect and efficiency.

4. Lower wear loss and enhanced service life.

Physical parameters:

Item	unit	Parameter
Composition	wt%	64% ZrO2 33% Si02
Packed Density	Kg/L	2.6~3.3(Φ7mm)
Specific Density	g/cm3	4.0~4.2
Hardness(HV)	Mohs’	>8.5
Elastic modulus	GPa	200
Thermal Conductivity	W/m.K	3
Crushing Load	KN	≥8 (Φ7mm)
Fracture Toughness	MPam1-2	6.7
Grain size	µm	≤0.8
Thermal expansion coefficient (20-400 )°C)	10x10 -6 / °C(20-400)	7.0

Application:

Widely used in fine grinding of engineering ceramics, zirconium silicate, GCC, Kaolin clay, alumina powder, TiO2, paints, inks and coatings in high speed stirred/sand mills. It can be also used as sand-blasting media for metal polishing.