Click image to view original picture
This product is particularly suitable for vertical stirred mill, horizontal rolling mill, vibration mill.
Specifications
Zirconium Oxide Ceramic Ball
* Zirconia grinding ball
* Big density
* High strength
* Good corrosion resistance
Zirconium Oxide Ceramic Ball:
This product is particularly suitable for vertical stirred mill, horizontal rolling mill, vibration mill, and various high-wire-speed sanding stick pins, etc.; the requirements of the refusal to cross-contamination of the slurry and powder for wet, dry dispersion and the ultra-fine grinding.
Features:
1.Wearing a very low (ppm) the amount of materials to prevent pollution
2.High grinding efficiency
3.Extremely long life, low cost integrated
4.For high viscosity, wet grinding and dispersion of occasions
Applications:
1.Wear-resistant, corrosion-resistant products: paints, textiles, paints, printing and dyeing
2.High strength, high toughness products: magnetic materials, piezoelectric ceramics, dielectric ceramics
3.To prevent pollution: medicine, food, cosmetics
4.Ceramics: Electronic ceramics, refractory ceramics, structural ceramics
Technical specification:
| Items | Unit | Data |
| Compsision | wt% | 94.8% ZrO2 |
| 5.2% Y2O3 | ||
| Packed Density | Kg/L | 3.73(Φ2mm) |
| Specific Density | g/cm3 | ≥6.02 |
| Hardness(HV) | GPa | >8.5 |
| Elastic modulus | GPa | 200 |
| Thermal Conductivity | W/m.K | 3 |
| Crushing Load | KN | ≥20 (Φ2mm) |
| Fracture Toughness | MPam1-2 | 9 |
| Grain size | µm | ≤0.5 |
| Thermal expansion | 10x10-6/ °C(20-400) | 9.6 |
| Coeffcient(20-400 °C) |
Size: Φ3mm,Φ5mm,Φ6mm,Φ8mm,Φ10mm,Φ12mm,Φ15mm,Φ20mm.
