Sell Ceramic fibre board

attending inorganic and suitable organic binders. The mixture is vacuum processed into boards or formed shapes that keep good mechanical strength after heating. These products can be manufactured using four basic fiber types: Sinoshine Board, classification temperature 1000,1100, 1260, 1400.

Sinoshine Ceramic Fibre Board family exhibits excellent chemical stability, resisting attack by most corrosive agents. Exceptions are hydrofluoric, phosphoric, hydrochloric and sulfuric acids as well as concentrated alkalies. Sinoshine Ceramic Fibre Board also resist oxidation and reduction. If wet by water, steam or oil, thermal and physical properties are completely restored upon drying.

Smooth surface

Low impurity, and average bulk density and thickness

Excellent mechanical strength and structural strength

Low thermal conductivity

Low shrinkage

Resistant airspeed eroding

Descriptions		SS-COM	SS-STD	SS-HP	SS-HA	SS-ZA
Classification temperature ()		1260	1260	1300	1400	1430
Operating temperature ()		1000	1000	1150	1260	1350
Color		White	White	White	White	White
Densitykg/m3)		260	260	260	260	260
		320	320	320	320	320
Permanent line constringency(%) ( heat preservation 24 hours, Density 320/ m3)		-4	-3	-3	-3	-3
		1000	1000	1100	1200	1350
Thermal transmit coefficient ( w/ m.k) ( Density 285 kgs/ m3)		0.085(400)	0.085(400)	0.085(400)	0.085(400)	0.085(400)
		0.132(800)		0.132(800)	0.132(800)	0.132(800)
		0.1801000	0.132(800)	0.180(1000)	0.180(1000)	0.180(1000)
Tensile Strength ( MPa)		0.5	0.5	0.5	0.5	0.5
The chemistry constitute (%)	AL2O3	4445	46	4749	5255	3940
	AL2O3+SiO2	96	97	99	99	-
	AL2O3+SiO2+ZrO2	-	-	-	-	99
	ZrO2	-	-	-	-	15-17
	Fe2O3	<1.2	<1.0	0.2	0.2	0.2
	Na2o+K2O	≤0.5	≤0.5	0.2	0.2	0.2
Dimensions (mm)		600×400×1050900×600×2050 Other specifications according to the customer request.

Application

Back-up lining of high-temperature industry furnaces

Hot-face lining of ceramic kilns,heat-treatment furnaces and other industrial kilnsInsulation for furnace door and kiln car