Sell Fabric fire retardant

Fabric fire retardant
1.Very safe
2. High performance to resist fire
3.Ecofriendly and no smell

Fabric fire retardant

Introduction of Flame retardant :

A flame retardant is a substance other than water that reduces flammability of fuels or delays their combustion. This typically refers to chemical retardants but may also include substances that work by physical action, such as cooling the fuels; examples of these include fire-fighting foams and fire-retardant gels. The name fire retardant may also be applied to substances used to coat an object,such as a spray retardant to prevent Christmas trees from burning.Fire retardants are commonly used in fire fighting.

Flame Retardant Finishing process on Textile Materials like Textile Cotton, Polyester fiber and fabrics:

 The burning cycle of polymeric material consist of 3 steps which is shown below-

If a polymeric material is caught by fire, the polymer absorb heat and melts which is the 1^st step (Condensed solid phase) leads to volatile pyrolysis products which has relatively low molecular weight.

In steps 2, this volatile products are oxidized with the air, O2, N2O and continuous to burn with giving up heat and finally gives rise to flame.

In steps 3, the heat is transferred from the oxidation products to the polymeric material which acts as fuel and the burning continues.

The burning cycle thus continues until the polymeric material is finished provided that there is no interruption in the three stages. The burning cycle may be utilized to design for flame retardency of textile fibers/fabrics/garments by the following ways-

• Flame retardancy can be done by interrupting the 1^st step by using agents which will produce char rather than tar. The car is flame retardant. This technique is suitable for wool and cotton but not suitable for polyester.

• Flame retardancy can be done by interrupting the 2^nd step by using bromine which slows down the free radical combustion reaction velocity.  This technique is applicable for polyester because it does form char. This technique is applicable is not so effective as technique A

• Flame Retardant can be done by interrupting the step 3 by using heat absorbing materials for example alumina tri-hydrate. This is the least effective method.

Advantages of Fabric fire retardant:
1.Very safe
2. High performance to resist fire
3.Ecofriendly and no smell

Our other textile auxiliary as follow:

Seq	Product	Code
1	Textile nano silver antimicrobial  agent	AGS-F-1
2	Textile antimicrobial  agent	JK-F-1
3	Textile oil,water and dust proof  agent	HZR-003
4	Textile anti-mite  agent	HZ-FM002
5	Chemical fibre durable flame-retardant agent	HZ-CU003
6	Textile aromatic capsule  agent	HZ-JN001
7	Textile mildew-resistant  agent	FM-001
8	Textile anti-formaldehyde  agent	HZ-CH20
9	Textile anion  agent	ARS-WF010
10	Textile far-infrared  agent	HZ-YH010
11	Nano silver aroma degout  agent	AGS-WMF1000C
12	Nano silver ultraviolet-proof  agent	ZWQ-1
13	Aloe collagen moisturizer	HZ-LH001
14	Leather mildew-resistant  agent	PM-002
15	Cotton anti-wrinkle  agent	MKZ-020
16	Down nano silver antimicrobial  agent	AGS-YR001
17	Textile easy dirt-proof  agent	EQW-020
18	Textile hygroscopic and perspiration  agent	XS-002
19	Textile multi-function  agent	KFY-F001
20	Textile multi-function  agent	KSZ-F002
21	Textile antistatic  agent	YJ-FJ002
22	Mono nano silver antimicrobial plastic	AGS-DMB5000
23	Silver zirconium phosphate antimicrobial	AGS-ZMB6000
24	Anion plastic master batch	ARP-MB020
25	Far- infrared plastic master batch	YHP-MB020
26	Charry bamboo plastic master batch	ZT-M020
27	Antistatic plastic master batch	C-MB020
28	Inorganic silver antimicrobial powder	AGP-ZP003
29	Inorganic nano silver antimicrobial powder	AGP-AP002
30	Nano anion powder	CRT-P200
31	Nano far infrared powder	CYH-P100
32	Nano charry bamboo powder	CZT-P100