Precaution, Pretection and Safety, all in FireTC
firetc@firetc.com
 
Inquiry For Fire Testing
 
Recommended Service
Hot Fire test center
 
Your location: Home » Fire test center » Standards & Regulation » USA » Text

ASTM E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

Zoom  Zoom Issue Date:2012-02-08   Browse:1023
ASTM E1354用氧气消耗热量计测定材料和制品热及可见烟释放率的试验方法
ASTM E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354用氧气消耗热量计测定材料和制品热及可见烟释放率的试验方法

This test method is used primarily to determine the heat evolved in, or contributed to, a fire involving products of the test material. Also included is a determination of the effective heat of combustion, mass loss rate, the time to sustained flaming, and smoke production. These properties are determined on small size specimens that are representative of those in the intended end use.
This test method is applicable to various categories of products and is not limited to representing a single fire scenario. Additional guidance for testing is given in X1.2.3 and X1.11.
1. Scope
This test method is not applicable to end-use products that do not have planar, or nearly planar, external surfaces.

2. Referenced Documents (purchase separately)
ASTM Standards
D5865 Test Method for Gross Calorific Value of Coal and Coke
E176 Terminology of Fire Standards
E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E603 Guide for Room Fire Experiments
E662 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E906 Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
ISO Standards
ISO5725-2(1994) Accuracy (trueness and precision) of measurement methods and results -- Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
Index Terms
cone calorimeter; heatheat release rate; ignitabilityradiant ignition; massmass loss rate; oxygen consumption methodheat release rate; smoke; Calibration--temperature analysis instrumentation; Fire testing--building materials; Heating tests--building products; Heat of combustion; Ignition--building materials; Oxygen bomb calorimeter methods; Oxygen consumption calorimetry; Smoke release rate; Visible smoke release rates;
 
 
[ Fire test center Search ]  [ ]  [ Forword to friends ]  [ Print ]  [ Close ]  [ Back to Top ]

 

 
 
Home | About us | Contact | Terms & Conditions | Copyright | Site Map | Friend link | Guestbook | Old Version | 闽ICP备09009213号
©2013-2015 FIRETC.NET All Rights Reserved   ICP:闽ICP备09009213号-4